Purpose:

Find out the density of the blocks of wood

Equipiment:

3 Blocks of rectangular wood, Caliper, Triple Beam Balance

Procedure:

Measure the wood using the caliper, then record the data. After finding the data, I then used it to calculate the volume, and used the triple beam balance to find the mass of the object. Then using those numbers we caluclated the density of the blocks of wood.

Data:

Data Analysis:

Conclusion:The purpose of this experiment was to determine the density of several blocks of wood. None of the results were questionable or surprising. It is possible that the pieces of wood are not perfect rectangles, so the density calculations could be off by a small margin.

### Like this:

Like Loading...

*Related*

Nice job!